QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 1 of 10 www.qorvo.com product overview the qpf 7200 provides a complete integrated solution in a single placement front end module (fem) for wi - fi 802.11 b/g /n systems. the full integration minimizes layout area in the customers application and greatly reduces the design complexity and the number of external components. performance is focused on conserving power consumption while maintaining the highest lin ear output power and leading edge throughput acro s s all wi - fi channels without the need to reduce transmit power to meet the fcc regulatory limits . the qpf 7200 integrates a 2.4ghz power amplifier (pa) with power detector , multiple switches, lna with bypas s mode , transmit bandedge baw filter for flat power transmission , and receive baw filter for wireless coexistence . the qpf 7200 integrated filtering also includes 2 nd and 3 rd harmonic s and 5ghz rejection for dual - band dual - concurrent operation. the device is provided in a 8 .0mm x 5.5mm x 1mm max laminate package. this module meets or exceeds the rf fron t end needs of ieee 802.11b/g/n wi - fi rf systems. functional block diagram 20 - pin 8.0mm x 5.5mm x 1mm leadless smt package key features ? fully i ntegrated front end module that includ es highly selective baw filter s achieving fcc bandedge and coexistence attenuation over operating conditions . ? optmized for 5v operation ? 3 7 ? db tx gain ? 2 db rx noise figure ? pout = +2 5dbm, 802.11n , mcs7 - 30 db evm ( bandedge compliant ch1 - 11 ) a pplication s ? ieee 802.11b/g/ n wlan applications ? wi - fi consumer premise equipment ? access points ? wireless routers ? residential gateways ? internet of things ordering information part number description qpf 7200 sb sample bag with 5 pieces qpf 7200 sq sample bag with 25 pieces qpf 7200 sr 7" reel with 100 pieces qpf 7200 tr7 7" reel with 2500 pieces qpf 7200 pcba - 410 assembled evaluation board gnd rfin gnd pa _ en vcc 2 gnd tx _ baw / byp lna _ en rx gnd nc pdet vcc 1 gnd tx / rx _ en gnd gnd ant gnd sw _ en
QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 2 of 10 www.qorvo.com absolute maximum ratings parameter rating unit storage temperature - 40 to125 o c case temperature, survival - 40 to100 o c rf input power , 11b/g /n (no damage) , 50, vcc=5 v + 5 dbm dc supply voltage (no rf applied) - 0.5 to +6.0 vdc dc supply current 1 .1 a lna on maximum rx input power (no damage) , 50, vcc=5 v + 15 dbm bypass mode maximum rx input power (no damage) , 50,t = 25oc, vcc=5 v + 25 dbm moisture sensitivity msl3 operation of this device outside the parameter ranges given above may cause permanent damage. recommended operating conditions parameter conditions min . typ . max . units compliance 802.11 b/g /n operating frequency ch1 - ch13 2402 .0 248 1 .5 mhz operating temperature - 20 +95 oc power supply vcc 1 3 .6 5 .0 5.25 v power supply vcc2 3.0 3.3 3.6 v control voltage - high pa_en, lna_en, tx/rx _en , sw_en, tx_baw/byp 2.9 3.0 3.1 v control voltage - low pa_en, lna_en, tx/rx _en , sw_en, tx_baw/byp 0 0.2 v degraded performance at extended operating range. logic truth table operating mode pa_en lna_en tx/rx _en sw_en tx_baw/byp standby 0 0 0 0 0 802.11a/n tx baw mode 1 0 0 1 0 802.11a/n tx bypass mode 1 0 0 1 1 802.11a/n rx gain mode 0 1 1 1 0 802.11a/n rx bypass mode 0 0 1 1 0
QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 3 of 10 www.qorvo.com electrical specifications C transmit (tx - ant) through tx baw parameter conditions vcc 1 =5v , vcc2=3.3v , t=+25oc; f = 2402 - 2472 mhz through tx baw filter, only ch1 - 11 min . typ . max . units logic truth pa_en=1, lna_en=0, tx/rx _en =0, sw_en=1, tx_baw/byp=0 small signal gain 3 7 db large signal gain pout = +25 dbm 3 7 db gain flatness for any 40mhz channel over frequency range - 0.25 - +0.25 db gain flatness for entire frequency renage - 1 - +1 db pout 11n ht20 mcs7 64qam +24 +2 4. 5 - dbm dynamic evm - 31 - 30 db pout 11n ht40 mcs7 64qam +24 +2 4. 5 - dbm dynamic evm - 31 - 30 db margin to spectral mask p out = + 25 dbm, 802.11n 20mhz mcs0 3 0 dbc input return loss 12 db output return loss 12 db operating current p out = 2 4 dbm, 802.11 n mcs 7 ht 20/ 40 650 ma quiescent current rf=off, tx mode 250 ma tx harmonics (2f 0 ) pout = + 25 d bm 802.11 b 1 mbps - 50 dbm/mhz tx harmonics (3f 0 ) pout = + 25 dbm 802.11b 1 mbps - 50 dbm/mhz power detector voltage p out = +0dbm pout = +15dbm pout = +20dbm pout = +24dbm pout = +27dbm 0.173 0.247 0.316 0.4 05 0.5 62 v fcc restricted band edge(conducted measurement) fem pout = +24 dbm - - 50 - dbm/mhz oob gain 2390mhz 5 db 2483.5mhz 13 db 4800 - 5000mhz - 45 db 5120 - 6000mhz - 45 db 1.60 - 1.95 ghz 0 db 3.2 - 3.9ghz - 5 db 7ghz - 45 db
QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 4 of 10 www.qorvo.com electrical specifications C transmit (tx - ant) bypassing tx baw parameter conditions vcc 1 =5v, vcc2=3.3v, t=+25oc; f = 24 67 - 24 72 mhz bypassing tx baw filter, ch1 2 - 13 only min. typ. max. units logic truth pa_en=1, lna_en=0, tx/rx _en =0, sw_en=1, tx_baw/byp=1 small signal gain 38 db large signal gain pout = 20 dbm 38 db gain flatness for any 40mhz channel over freq. range - 0.25 - +0.25 db gain flatness for entire frequency band - 1 - +1 db pout 11n ht20 mcs7 64qam +20 - dbm dynamic evm - 31 - 30 db pout 11n ht40 mcs7 64qam +2 0 - dbm dynamic evm - 31 - 30 db margin to spectral mask pout = +2 0 dbm, 802.11n 40mhz mcs0 2 0 dbc margin to spectral mask pout = +2 0 dbm, 802.11n 20mhz mcs0 2 0 dbc input return loss 12 db output return loss 12 db operating current pout = 2 0 dbm, 802.11n mcs7 ht20/40 435 ma quiescent current rf=off, tx mode 250 ma tx harmonics (2f 0 ) pout = +20 dbm 802.11b 1 mbps - 40 dbm/mhz tx harmonics (3f 0 ) pout = +20 dbm 802.11b 1 mbps - 45 dbm/mhz power detector voltage p out = +0dbm pout = +15dbm pout = +20dbm pout = +24dbm pout = +27dbm 0.171 0.225 0.287 0. 360 0. 487 v
QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 5 of 10 www.qorvo.com electrical specifications C receive mode parameter conditions vcc 1 =5v, vcc2=3.3v, t=+25oc; ch1 - 13 min. typ. max. units frequency range 2402 - 248 1 .5 mhz gain C lna mode lna enabled - 12 - db gain C bypass mode lna disabled - - 8.0 - db gain flatness C lna mode for any 4 0 mhz channel over the frequency range. lna enabled. - 0 . 2 5 - + 0.2 5 db gain flatness C bypass mode for any 20 mhz channel over the frequency range. lna disabled. - 0.25 - +0.25 db noise figure C lna mode lna enabled - 2.0 - db current C lna mode lna enabled - 15 - ma input ip3 C lna mode lna enabled - 2 - dbm input ip3 C bypass mode lna disabled - 20 - dbm input p1db C lna mode lna enabled - - 5 - dbm input p1db C bypass mode lna disabled - +17 - dbm oob gain (high gain mode) 2170 mhz - - 3 0 - db 2300 - 2375 - - 38 - db 2500 - 2700 - 35 - db 4800 - 6000 - 45 - db lna turn on/off time lna enabled - 200 - ns return loss C rx port lna mode lna enabled - - 8 - db return loss C rx port bypass mode lna disabled - - 7 - db return loss C ant port lna mode lna enabled - - 10 - db return loss C ant port bypass mode lna disabled - - 10 - db . general specifications parameter conditions vcc=5v, t=+25oc; ch1 - 13 min. typ. max. units fem leakage current 1 10 a pa_en control current 200 a lna_en control current 200 a other controls current 600 a switching speed 400 ns esd C human body model 500 v esd C charge device model 500 v pa turn - on time from pa_en edge 10% to 90% of final gain 200 500 ns pa stability unconditional into 4:1 vswr; no spurs above - 41.25dbm/mhz
QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 6 of 10 www.qorvo.com evaluation board schematic place a capacitor ~ 90 mils from pin 5 (rfin) up to 3.6v
QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 7 of 10 www.qorvo.com pin configuration and description top view pin number label description 1 rx rf output port for the 802.11 lna. this port is matched to 50? and dc blocked internally 2 gnd ground connection. 3 pa_en enable pin for the pa. may be pulsed for lower duty cycle operation 4 gnd ground connection. 5 rfin rf input for the tx chain. this port is matched to 50 ? and dc blocked internally. 6 gnd ground connection. 7 vcc1 supply rail for pa, 5v nominal 8 n c gnd on pcb (not internally connected) 9 pdet power detect voltage 10 gnd ground connection. 11 tx_baw/byp path selection pin for tx bypass/ tx thru baw 12 sw_en switch logic enable pin. may be tied to vcc2 if voltage < 3.3 v 13 gnd ground connection 14 ant rf common port. this port is matched to 50? and dc blocked internally 15 gnd ground connection 16 tx/rx _en tx/rx switch path selection pin 17 gnd ground connection 18 lna_en lna high gain/bypass path selection pin 19 gnd ground connection 20 vcc2 supply rail for the lna, and switches (limit to 3.3v) pkg base ground connection. the backside of the package should be connected to the ground plane through a short path, i.e., pcb vias under the device are recommended. gnd rfin gnd pa _ en vcc 2 gnd tx _ baw / byp lna _ en rx gnd nc pdet vcc 1 gnd tx / rx _ en gnd gnd ant gnd sw _ en
QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 8 of 10 www.qorvo.com package outline drawing notes: 1. all dimensions are in mm . angles are in degrees. 2. dimension and tolerance formats conform to asme y14.4m - 1994. 3. the terminal #1 identifier and terminal numbering conform to jesd 95 - 1 spp - 012.
QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 9 of 10 www.qorvo.com p cb mounting patterns notes: 1. all dimensions are in m m . angles are in degrees. 2. dimension and tolerance formats conform to asme y14.4m - 1994. 3. the terminal #1 identifier and terminal numbering conform to jesd 95 - 1 spp - 012.
QPF7200 2.4ghz integrated wi - fi front - end module data sheet 201 70719 | subject to change without notice 10 of 10 www.qorvo.com handling precautions parameter rating standard caution! esd sensitive device esd C human body model (hbm) t bd esda/jedec js - 001 - 2012 esd C charged device model ( cdm ) t bd jedec jesd22 - c101 f msl C moisture sensitivity level t bd ipc/jedec j - std - 020 solderability compatible with both lead - free (260 c max. reflow temperature) and tin/lead (245 c max. reflow temperature) soldering processes. package lead plating: electrolytic plated au over ni rohs compliance this part is compliant with the 2011/65/eu rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment), as amended by directive 2015/863/eu. this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp - a (c 15 h 12 br 4 0 2 ) free ? svhc free contact information for the latest specifications, additional product information, worldwide sales and distribution locations: web: www.qorvo.com tel: 1 - 844 - 890 - 8163 email: customer.suppo rt@qorvo.com important notice the information contained herein is believed to be reliable; however, qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information co ntained herein. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for qorvo products. the information contained herein or any use of such inf ormati on does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information its elf or anything described by such information. this information does not constitute a warranty with respect to the products described herein, and qorvo hereby disclaims any and all warranties with respect to such products whether express or implied by law, course of dealing, course of performance, usage of trade or otherwise, including t he implied warranties of merchantability and fitness for a particular purpose. without limiting the generality of the foregoing, qorvo products are not warranted or authorized for use as critical componen ts in medical, life - saving, or life - sustaining appli cations, or other applications where a failure would reasonably be expected to cause severe personal injury or death. copyright 2016 ? qorvo, inc. | qorvo is a registered trademark of qorvo, inc . p b
|
